Table of Contents
Table of Contents
Configuring the Linux Hardware
| Warning |
|---|
All Linux related settings like network configuration and storage settings should be done by a certified ToolsOnAir partner. After that it is not required to change any just:in related settings on the Linux server, as every setting can be done via the just:connect User Interface. |
Number of usable Channels
The number of Channels you can use depends on the Linux server (= hardware). By default just:in Linux v2.0 supports these hardware configurations:
- 4xHD or 1x4k/UHD (up to p60)
- 8xHD or 2x4k/UHD (up to p60)
Expansion PCIe Cards
just:in Linux is shipped as a server appliance and comes with a video card already integrated. It is also possible to add another PCIe card to the second slot, like a fibre channel card to connect different storage systems to the Linux appliance.
| Info |
|---|
The system is shipped with two 10Gbit RJ45 ports by default. |
Internal RAID
The system is shipped with an internal RAID (RAID0 or 10). This RAID is available at /media/internal_raid/ingest and is shared via SMB by default. The default user is "justin" and the default password is also "justin".
| Warning |
|---|
Please consult a certified ToolsOnAir partner or a member of ToolsOnAir when enabling any post record file move processes in order to prevent problems. |
Installation of the just:in User Interface
- The just:in User Interface can be downloaded from our support system. Follow the regular installation procedure described in the appropriate User Manuals.
- Alternatively you can connect to the just:in Linux system via SMB. The default user is "justin" and the default password is also "justin". Mount the sharepoint /media/internal_raid/tools. Afterwards you may copy the just:in User Interface from there and follow the regular installation procedure described in the appropriate User Manuals.
...