Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Warning

Playout of realtime GFX templates can failmay encouter failure, due to a bug an inconsistency in macOS Sonoma. Because of this we We recommend that all customers using who utilize an INTEL-based Mac and realtime GFX continue to stay with utilize macOS 13.6.x Ventura until Apple solves the issueresolves the issue.

Customers using an INTEL-based Mac who would like to use SRT or UDP streaming out

We recommend all customers using an INTEL-based Mac to reduce the data rate used for the H.264 compression to 1500kbps or less. Using a higher data rate will result in dropped frames and an automated restart of the Just Out application, once too many frames have been dropped.

General Notes

Before upgrading to v.5.x of our playout applications, please be aware of the following changes.

Note
  • A All customers using v4.x or lower - a new activation code is needed to use v.5 of just:live and just:play.

  • The MacMini6,x and MacMini7,x are not supported any more, and we strongly recommend all customers using such a Mac mini model to update to a new Apple silicon-based Mac mini M1 (Macmini9,1) or Mac mini M2 (Mac14,3, Mac14,12 (M2 Pro)).

  • There are new v.5 documents available for version 5, and we recommend all new and existing customers updating from a previous version to read consult the new user guides.

We ask kindly request that all users updating upgrading from a previous version adhere to follow our update guide, which can be found here:https://toolsonair.atlassian.net/wiki/spaces/TST/pages/3580594317#Installing-a-new-Version-over-an-existing-Version

...

All customers upgrading from a previous version require a new v.5 activation code to be able to play out using Just Out without a watermark applied on the SDI or NDI® , NDI®, SRT, UDP or ST-2110 output.

Customers using TeamViewer to access the Mac running Just Out

If you’re planning to use TeamViewer to access a machine running Just Out, please verify that you have the following settings deactivated in the Preferences pane “Remote control” panel of the TeamViewer client (the machine you use to connect to the machine running Just Out).

...

Failing to do so will switch the audio output away from the video device at the same time you connect to the machine running Just Out using TeamViewer.

Version 2.x features which are not available

...

in Version 5

In v.5 some features are not available which have been available in v.2.x. Some of those features may be Specific features that were available in Version 2.x are no longer available in Version 3 and higher. The comparison table below shows some of the features that may become available again in future releases, while others had to be removed permanently.

Note

If Please do not upgrade to the new version if you need any of the removed features listed below, please do not upgrade to the new version and contact . Contact ToolsOnAir for advice on the ideal version for your playout scenario.

Not available in v.4

Will be available in a future version

GPI Out via JL-Cooper eBox

MOS Integration

Possibly, a different approach

REST API Request and on:Core Workflows

Summary & Performance in Just Connect

Movies in GFX Compositions and/or playing on a GFX track

Custom Script

Possibly, a different approach

Video Input Device for On Air window

Possibly as a stream

Contour Shuttle Pro, (Euphonix) Avid MC Transport

Possibly with other devices

Web interface to control GFX

available with v.4.1 and higher

Ability to save and load window layouts and positions

Undocking of windows and Master TC in just:live

Poster frame Mode in just:live

Possibly, a different approach

Built-in RTMP Streaming outOUT only

Note: NDI®, SRT and UDP support IN and OUT

NDI® support available in v.5.x

SRT and UDP support available in v.5.5

just:next

Not a separate application any more, but the group function in the Multi Viewer provides the same function

TOA Log Analyzer application

Possibly, a different approach

MIDI TC out of the Just Out engine

720p24 and all 4K formats

Full Ultra HD support provided

FAB

Native OP-47 support available

Hardware based Up/Down Conversion on the input and output and different output formats

Import of Final Cut Pro compatible XMLs

...

If you rely on these codecs, please keep using v.2.x (or a previous version) and contact us. Some codecs/containers can also be added to the system by installing Apple's Pro Video Formats. Please find more information about Codecs and Containers in section 2.4 Supported Video Containers & Video Codecs (v4v.5.0) and how to install support for additional Containers and Codecs using the Apple Pro Video Formats.

Using v.2.x Channels in v.5.x

While we have thoroughly tested the updating procedure from existing channels to v.4.x, we have stopped doing so with v5. Because of this, we When updating from version 2.x, we strongly recommend backing up existing channel(s) using the backup feature of Just Connect (see Advanced Settings) or by copying the channel from /Library/Application Support/ ToolsOnAir/Just Connect to an external storage, before performing the update.

...

With v.3.x we introduced a unified control application for all ToolsOnAir applications called Just Control. During the setup, the administrator can define which one of the two available solutions/user interfaces, namely just:live or just:play should be used for a certain specific channel.

Poster Frames in v.5.x

Poster Frames in v.In version 5.x, the Poster Frames are generated compressed, like as it was the case in version 2.x. Even so, please make sure to save them on a fast and big storage which , that is not the same storage you use as the repository of your movies. The internal SSD or another fast internal disk is perfect for storing the Poster Frames.

SMB issues using some versions of macOS

We have experienced performance issues with shared storage connections using older versions of the SMB protocol. If you encounter such issues, please contact your storage provider for assistance. Alternatively, you might try using the following macOS Terminal commands, on all Macs running TOA software, to disable the SMB 1 protocol, which may improve the faulty behaviorbehaviour:

echo "[default]" | sudo tee -a /etc/nsmb.conf

echo "protocol_vers_map=6" | sudo tee -a /etc/nsmb.conf

For Customers with more than

...

5,000 Video files in a single Folder

Whenever a movie video file is added/removed or changed, the content of the whole folder has to be scanned to update the Library. During our tests, we have seen, observed that this can take a few seconds when there are more than 5000 5,000 files in a folder. Because of this, we recommend limiting the amount of movie video files in a single folder to a maximum of 50005,000.