Capture Presets define the output format of a Recording (codec, container, resolution, audio channels, etc.). Before you can start Recordings with Just Control, you need to create one or multiple Capture Presets. After defining the Capture Preset(s), you can quickly access them in the Just Control Inspector. This accelerates the recording process and helps to keep things organised.
| Info |
|---|
To perform any changes within the Just Control Configuration panel, you have to unlock the panel first. |
| Table of Contents |
|---|
Overview
Open the Just Control Configuration panel, select a Device, and switch to the “Capture Presets” tab.
...
Capture Preset List: shows all available Capture Presets. Use the buttons below to add and remove Capture Presets. Double-click on a Capture Preset Name to adjust the Preset Name.
Capture Preset Configuration Options: Set the required options for a Capture Preset:
“TV Norm”: select the TV Norm.
“Container”: select the Container.
“Aspect Ratio”: select the Aspect Ratio.
“Codec”: select the Codec. After selecting the “Codec” you may be asked for the Frame rate and Resolution as well.
“Audio Channels”: select the number of Audio Channels. After selecting the Audio Channels, you may be asked for the Audio Track Alignment (Mono or Stereo) as well.
“Audio MappingBurnt-in-timecode”: use enable this option setting to change the audio output mapping for burn in the given timecode to the recorded files.
“Do not write captions to containerAudio Mapping”: enable use this option if you would rather not write closed caption data into the recorded file.“Burnt-in-timecode”: enable this setting to burn in the given timecode to to change the audio output mapping for the recorded files.
“Overlay logo”: with this option, it is possible to overlay a logo/image on the video of the recorded video files.
“Custom Overlay”: TBD. Please refer to [TBD] [JIM] Custom Overlays v.6.0 for detailed information.
“No hardware encoding, even if available”: Activate this setting if you wish to bypass encoding using the designated hardware encoder. Instead, opt for CPU-based processing for this particular encoding procedure. This feature proves exceptionally beneficial when dealing with multi-channel recording situations involving the utilisation of multiple capture IDs.
“Do not write captions to container”: enable this option if you would rather not write closed caption data into the recorded file.
Add a Capture Preset
In the “Device & Channel List” select a Device. Click on the “Capture Presets” tab and press the Plus ("+") button to add a new Preset.
...
A new window appears, where you have to enter the Name of the new “Capture Preset”. Press the “Create” button to go back to the Preset option.(NEW SCREENSHOT TBD)
...
Next, configure the new “Capture Preset”. It will be saved automatically after all options have been set. (NEW SCREENSHOT TBD WITH Overlay options)
...
...
Capture Preset options can be changed at any time.
Edit an existing Capture Preset
...
Select an existing Capture Preset and change the options on the right side. The changes will be saved automatically.
...
Remove a Capture Preset
Select an existing Capture Preset and use the Minus ("-") button below the Capture Preset list to remove the selected Capture Preset.
Apple ProRes & Avid DNxHD/HR
...
When creating an Apple ProRes or Avid DNxHD/HR-based Capture Preset, you need to select the Frame rate and Resolution, after selecting the related codec option.
...
Audio Channels and Audio Track Alignment
...
You can choose between “2”, “4”, “8” and “16” Audio Channels for “Capture Presets”. Some configurations may require an Audio Track Alignment setting as well.
...
Please note, that some codec/container options allow only “2”, “4” or “8” Audio channels as options.
Burnt-in-timecode
Enable this setting to burn in the given timecode to the recorded files. The size and the offset from the bottom can be configured as well.
...
...
Output:
...
Overlay logo
With this option, it is possible to overlay a logo/image on the video of the recorded video files. An image path, the position from top/left and the opacity can be configured.
...
Output:
...
Custom Overlay
Please refer to [TBD] [JIM] Custom Overlays v.6.0 for detailed information.
...
Possible output:
...
Audio Mapping
The “Audio Mapping” option enables the possibility to adjust the output mapping for the recorded video files of the incoming audio channels in a simple way.
...
You can set an Audio Output Track to “Silence” as well if needed.
H.264 Settings
...
When creating an H.264 Capture Preset, you have to select “H.264” specific settings.
...
Please note that not all custom resolutions are supported by the macOS built-in hardware encoder.
Growing Files
just:in mac supports growing files (for macOS and Windows-based NLEs) with various formats. If you have specific needs or questions, please do not hesitate to contact us. When working with Adobe Premiere Pro as your NLE of choice, please refer to this Adobe Knowledge-base article as well.
DaVinci Resolve
When using Blackmagic Design’s DaVinci Resolve, working with growing files is possible as well, but only when using direct-attached storage. Tests with network-attached storage showed inconsistent behaviour, and therefore it is not recommended. Please do not hesitate to contact us, to get additional information or to discuss your recording and editing workflow.
...