Besides playing Videos and Graphics, our playout solutions also allow you to manage live input signals like sch as live studio signals or satellite feeds, and send it them to the SDI or NDI® output.
This can be done by…
...
The Downstream Keyer-based method (DSK In-based)
The non Downstream Keyer-based method (Buffered In-based)
...
| Warning |
|---|
Using the playout video device to switch to the Live Input signal means, that the video card synchronizes to the incoming video and not to the reference signal. To stabilize the signal in advance (i.e. before it is sent to the video card input) you must use a frame synchronizer which supports the playout format of your channel. Suited frame synchronizers can be found on the AJA Website or you can also use a Blackmagic Design ATEM switcher. In case If VANC data has to be passed throughpass-through is required, an AJA FSx device (except the mini), or any other frame store which allows to pass passing through VANC data, has to be used. Please contact the manufacturer of all 3rd party video devices which are used with your setup to make sure, that they can handle the VANC data as needed. |
...
Works with all supported AJA devices.
Does not work with devices from Blackmagic Design.
Live Input signal is not sent to the Just Out engine but is passed through using AJA’s hardware.
Live Input signal can not cannot be seen in the On Air view of the Just Control user interface.
Live Input signal can not cannot be part of a realtime Graphics template - scaling as part of the template, for example.
VANC data which comes with the Live Input signal can NOT be passed through to the output.
...
Works with the AJA Io 4K Plus, Io X3, and the KONA 4/5 respectively.
Works with all devices from Blackmagic Design that have "4K" or “8K” in their model name.
Works in case the engine is set up using an NDI® stream as the input and output “device”.
Live Input signal is grabbed at the input and sent to the Just Out engine.
Live Input signal can be seen in the On Air view of the Just Control user interface.
Live Input signal can be part of a realtime Graphics template.
VANC data which comes with the Live Input signal can be passed through to the output.
...