Capture Presets define the output format of a Recording (codec, container, resolution, audio channels, etc.). Before you can start Recordings with Just Control, you need to create one or multiple Capture Presets. After defining the Capture Preset(s), you can quickly access them in the Just Control Inspector. This accelerates the recording process and helps to keep things organizedorganised.
| Info |
|---|
To make perform any changes within the Just Control Configuration panel, you have to unlock the panel first. |
| Table of Contents |
|---|
Overview
Open the Just Control Configuration panel, select a Device, and switch to the “Capture Presets” tab.
...
Capture Preset List: shows all available Capture Presets. Use the buttons below to add and remove Capture Presets. Double-click on a Capture Preset Name to adjust the Preset Name.
Capture Preset Configuration Options: Set the required options for a Capture Preset:
“TV Norm”: select the TV Norm.
“Container”: select the Container.
“Aspect Ratio”: select the Aspect Ratio.
“Codec”: select the Codec. After selecting the “Codec” you may be asked for the Frame rate and Resolution as well.
“Audio Channels”: select the number of Audio Channels. After selecting the Audio Channels, you may be asked for the Audio Track Alignment (Mono or Stereo) as well.
“Burnt-in-timecode”: enable this setting to burn in the given timecode to the recorded files.
“Audio Mapping”: use this option to change the audio output mapping for the recorded files.
“Do not write captions to container”: enable this option if you don’t want to write closed caption data into the recorded file.
“Burnt-In timecode”: TBD
“Overlay logo”: TBD
““Overlay logo”: with this option, it is possible to overlay a logo/image on the video of the recorded video files.
“Custom Overlay”: TBD. Please refer to [TBD] [JIM] Custom Overlays v.6.0 for detailed information.
“No hardware encoding, even if available”: Activate this setting if you wish to bypass encoding using the designated hardware encoder. Instead, opt for CPU-based processing for this particular encoding procedure. This feature proves exceptionally beneficial when dealing with multi-channel recording situations involving the utilisation of multiple capture IDs.
“Do not write captions to container”: enable this option if you would rather not write closed caption data into the recorded file.
Add a Capture Preset
In the “Device & Channel List” select a Device. Click on the “Capture Presets” tab and press the Plus ("+") button to add a new Preset.
...
Next, configure the new “Capture Preset”. It will be saved automatically after all options are have been set.
...
Capture Preset options can be changed at any time.
Edit an existing Capture Preset
Select an existing “ Capture Preset”Preset and change the options on the right side. The changes will be saved automatically.
...
Remove a Capture Preset
Select an existing “ Capture Preset”Preset and use the Minus ("-") button below the “ Capture Preset”Preset list to remove the selected “ Capture Preset”Preset.
Apple ProRes & Avid DNxHD/HR
When creating an Apple ProRes or Avid DNxHD/HR-based Capture Preset, you need to select the Frame rate and Resolution, after selecting the related codec option.
...
Audio Channels and Audio Track Alignment
You can choose between “2”, “4”, “8” and “16” Audio Channels for “Capture Presets”. Some configurations may require an Audio Track Alignment setting as well.
...
Please note, that some codec/container options allow only “2”, “4” or “8” Audio channels as options.
Burnt-in-timecode
Enable this setting to burn in the given timecode to the recorded files. The size and the offset from the bottom can be configured as well.
...
Output:
...
Overlay logo
With this option, it is possible to overlay a logo/image on the video of the recorded video files. An image path, the position from top/left and the opacity can be configured.
...
Output:
...
Custom Overlay
Please refer to [TBD] [JIM] Custom Overlays v.6.0 for detailed information.
...
Possible output:
...
Audio Mapping
The “Audio Mapping” feature option enables the possibility to adjust the output mapping for the recorded video files of the incoming audio channels in a simple way.
...
You can set an Audio Output Track to “Silence” as well , if needed.
H.264 Settings
When creating a an H.264 Capture Preset, you have to select “H.264” specific settings.
...
Note that “Custom” has to be selected as the “TV-Norm”, when working with “H.264” presets.
...
H.264 is a complex codec standard and is a bit more tedious to set up. Therefore, just:in mac provides various options, which that can be modified within an “H.264 preset”. After choosing the container type, you have to define two general settings:
Resolution
Frame rate
Next, select the aimed “H.264 profile” and choose between multiple encoder profile options. Then you can set the Bitrate in bit/s, B-Frames, the GOP-Size, and the Entropy Mode.
Please note that some Mac Models have a built-in H.264 hardware encoder, which just:in mac can use for the H.264 encoding process. This happens automatically when working with an H.264 Capture Preset. If you are using a Mac without such an H.264 encoder, you will see a warning message in the Errors and Warnings Section within the Inspector.
...
Please note that not all custom resolutions are supported by the macOS built-in hardware encoder.
Growing Files
just:in mac supports growing files (for macOS and Windows-based NLEs) with various formats. If you have specific needs or questions, please do not hesitate to contact us. When working with Adobe Premiere Pro as your NLE of choice, please refer to this Adobe Knowledge-base article as well.
DaVinci Resolve
When using Blackmagic Design’s DaVinci Resolve, working with growing files is possible as well, but only when using direct-attached storage. Tests with network-attached storage showed inconsistent behaviorbehaviour, and therefore it is not recommended. Please do not hesitate to contact us, to get additional information or to discuss your recording and editing workflow.
...