...
- Open just:in on your Mac.
- Go to the menu Just In → Manage just:in Linux Channels (shortcut: command + option + comma).
- A window called Just In Configuration appears.
- Unlock the Configuration window by pressing the Make Changes button.
- Press the plus button in the upper left to add a just:in Engine.
- Enter the IP Address and the Port of the Engine. The default Port is 5000 (Default port can be changed later, as soon as the just:in engine is successfully connected to the UI).
- Press the Add button.
- The Engine Configuration Wizard shows up.
- Device Name: Enter an Engine name. This can be any name and will be used to identify the Engine in the Engine List.
- Channels: Set the number of Channels (= SDI Inputs)
- Channel Name: Set the Channel name. This can be any name an will be shown in the just:in User Interface.
- Default Storage Path: A default Destination Preset will automatically be created with this path. You must have to enter a Linux filesystem path here. Do not enter the Mac path, as the Engine writes the files, not the just:in Mac User Interface.
- SDI Format: Select the Video Mode of the Engine.
- First Channel Port: Sets the Port for the first Channel.
- Engine Host:Port: Will be set automatically. This only needs to be changed if just:connect is running on a different machine.
- Clock Host:Port: Will be set automatically. This only needs to be changed if the PTP clock is running on a different machine.
- Capture Preset List: Allows you to filter and select available Presets.
- After entering all settings you can select Presets in the Capture Preset List. They will be created automatically after pressing the Configure button.
- If everything has been configured properly the connection to the Engine will be established. If not please → contact us.
...