...

1. Open just:in.
2. Optional: if there are multiple Viewers, first select the Viewer you want to connect to the Channel. You can still reorder Viewers later by drag & drop.
   
3. Open the Connections Window by selecting the menu command Channel → Connections or use the shortcut command + K. You can also click on the Connections Window button while hovering above a Channel View.
   
   
4. Press the Connect button of the desired Channel to connect to it.
   
5. The Channel Preview should now be shown and you are ready to use the Channel.
   
6. If you should get this warning, double check your IP-Address and Port as well as the configuration of just:in Engine and the network. Also read the troubleshooting info at the end of this chapter.
   

Disconnecting from a Channel

1. Open just:in.
2. Optional: if there are multiple Viewers, first select the Viewer you want to disconnect from. 
3. Select the menu command Channel → Disconnect or use the shortcut command + shift + D.
   
4. You may now connect another Channel to the Viewer.

Image Added

Removing a Channel

1. Open just:in.
2. Open the Connections Window by selecting the menu command Channel → Connections or use the shortcut command + K.
   
3. Click on the X button of the appropriate Channel to remove it from the Channel Manager. This cannot be undone.

Image Modified

...

Disconnecting from a Channel

1. Open just:in.
2. Optional: if there are multiple Viewers, first select the Viewer you want to disconnect from. 
3. Select the menu command Channel → Disconnect or use the shortcut command + shift + D.
   
4. You may now connect another Channel to the Viewer.

Image Removed

...

Pending Channel Connections

When a Channel connection cannot yet be established or has been interrupted, the Connections Window will display Connecting… on the particular Channels. Wait for the Channels to be online or read the troubleshooting information below.

...