The just:in User Interface offers three different interfacesinterface setups, each one has its own advantages.
| Table of Contents |
|---|
Mode 1: Channel View Mode
- Offers a clean view of all your
...
- Channel Views while using the maximum
...
- size possible (depending on the number of Channels
...
- ).
- You may change the Timecode and Capture Mode at any time.
- The Inspector can be opened with the button in the top
...
- right corner.
Mode 2: Channel and Inspector View Mode
- Shows all
...
- Channel Views and the Inspector.
...
- You can use the Inspector at any time, while loosing some space for the Channel Views.
- In some situations this
...
- View Mode is mandatory, for example when using the Batch Capture Mode.
...
Mode 3: Single Channel View Mode
...
- The Single Channel View Mode offers the maximum size for the currently selected Channel.
- You can
...
- switch to the Single Channel View Mode by selecting a
...
- Channel View and
...
- then pressing the spacebar – or
...
Switching between the Channel/Inspector View and the Single Channel View
Select one Channel and double click on it or press the space bar to switch between the Single Channel View and back to the previously selected View Mode. This method does not work if no Channel, or if more than one Channel is selected.
...
- by double clicking the Channel View.
