...

1. → Download just:in from our Online Helpdesk (free account required).
2. Extract the downloaded ZIP archive.If this dialog appears refer to the very top of this Getting Started.
   Image Removed
   
3. The just:in disk image will show up.
   
   
   

4. Copy Just In to the Applications folder.

   Warning
   Do not copy Just In Engine, as this is the Mac version of the Engine, which is not required when using the just:in Linux Engine.

   
   

5. If desired, add the just:in Application to your Dock.

...

1. Go to the Applications folder and open the just:in Application.
2. The just:in main window appears.
   Image RemovedImage Added

3. Configure a just:in Linux Engine

1. Go to the menu Just In → Manage just:in Linux Channels (shortcut: command + option + comma).
2. Unlock the configuration page and hit the "+"-Button for adding a new just:in linux engine.
3. Then enter the IP and Port number and press Add.

4. The just:in Configuration window appears and the Channel Wizard shows up.

   Info
   If the Channel Wizard should not show up, please contact us.

   
   

5. Enter the Channel Name (1), select the Input (2) and the SDI Format (3). Configure the remaining settings accordingly to your needs. When you are done press the Configure button in the lower right to continue.
   Image RemovedImage Added
   
   
6. The Channel new Engine has been added to the Channel Engine List.
   Image RemovedImage Added
   
   
7. Close the just:in Linux Engine configuration window.

...

1. Click the icon in the center of the main window to show the Connections Window which allows you to connect to a Channel.
   Image Removed
   Enter the IP-Address and the Port of a Linux Channel and press the Add button. Repeat this for every Channel you would like to connect to from this user interface.
   Image Removedwill list all available channels of the previously connected just:in linux engine.
   Image Added
   
   
2. Press the Connect button to connect to the Channel.
   Image RemovedImage Added
   
   
3. Upon successful connection just:in displays the Channel Preview.
   Image RemovedImage Added
   
   
4. The Getting Started ends here. For further information please refer to the just:in v3.0 5 Administrator Manual and the just:in v3.0 5 User Manual.

...