Versions Compared

Old Version 32

changes.mady.by.user Georg Deisting

Saved on

compared with

New Version 33

changes.mady.by.user Georg Deisting

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Here are more informations how to configure an AJA device for play out.

...

Gliffy
chromemin
size400
html5false
nameadmin 4.1a

Control

Here you choose the Default Output you'd like to have when just:out is not started. Also configure the Playback Timing:

  • Choose Free Run if you do not have a reference signal attached to the AJA device and the DS Keyer setting is OFF.
  • Choose Ref In if you have a reference signal attached to the AJA device. This implies that you don't turn on the DS Keyer for the DSK based switch-to-live functionality
  • Choose Video In if you have turned on the DS Keyer to enable the switch-to-live functionality and remove any signal which is attached at the Ref. In.

Gliffy
chromemin
size400
nameadmin 4.1b

Format

Select the primary format your playout will use. This is usually the same format you have chosen as the Output Format in just:connect. Although just:out will change the format automatically, we recommend to set the primary and – if available – the secondary format here. Defining a secondary format allows you to get two different output formats of the same playout. Also set the RGB Range to FULL.


Gliffy
size400
nameadmin 4.1c

Video Setup

Make sure the format you would like to use is activated under the VOut Filters. This is very important especially for UHD/4K play out, because only those formats which are activated here can be selected as the output format in just:connect.

Info

Activate the VANC option here to enable the AJA device to play out ClosedCaptions.

Gliffy
size400
nameadmin 4.1d

Conversion

Set Pause on to Full Frame and configure the YUV-RGB Conversion settings like shown in the screenshot.