The advantage of using the built-in method is, that it is possible to switch between a live signal and the playout of a movie without the need of a video router. In addition it is possible to add graphics to the live signal without the need of a second video device.
Like described above, there are two methods to achieve this and here is how the DS Keyer based setup (AJA only) has to be done.
| Info |
|---|
Activating the 4K mode of an AJA device, the ability to do hardware based Up, Down and Cross conversion as well as the ability to activated the DS Keyer or to play out Fill&Key will be disabled. So make sure the UFC Mode firmware is loaded to be able to use an DSK based switch to live method. |
| Connect a signal and select the input in the AJA control panelConnect the live signal to any of the available video inputs and select that input in the AJA control panel Input Select. | ||||||||
| Activate the built-in downstream keyer of the AJA deviceConfigure the AJA downstream keyer according to this screenshot to activate the pass-through mode:
| ||||||||
| Select the right switch to live method for your channelOpen the Advanced Output Format settings of just:connect and select one of the available Without DSK-based settings.
|
...