...
Table of Contents |
---|
...
Overview
On the just:in Engine Linux server appliance you can find:
- The basic linux Linux installation (centOS)
- video Video card driver (AJA or BMDBlackmagic)
- just:in engine (toa media engine Engine (TOA Media Engine = tme)
- just:connect (tjc)
Justjust:in engine Engine Linux and just:connect start automatically after each system start and communicate with the just:in user interface (macOS).childrenwhen the Linux system has been booted. If they are configured properly they can immediately communicate with a just:in User Interface.
User and Password
The system can be accessed with following credentials via ssh.
Code Block |
---|
User: justin
Password: justin |
Network Settings
By default both network ports are set to DHCP (also the IPMI port is set to DHCP).
Blackmagic Firmware Updater
Warning |
---|
Only update the Blackmagic driver if you have issues with the system. |
In some situations the Blackmagic video card needs a Firmware update. Verify if the card is working properly with the installed driver version by using the following command:
Code Block |
---|
BlackmagicFirmwareUpdater status |
No Firmware update is required if all inputs display the status ok. If the status is not ok use following command to update the firmware. Restart the system afterwards.
Code Block |
---|
BlackmagicFirmwareUpdater update [device] |
just:connect Configuration File & Logs
just:connect stores all Channel related information (settings, presets…) in this file:
Code Block |
---|
/var/justconnect.txt |
Delete this file if there is a major problem with the system. After deleting this config file just:connect must be restarted.
Logs
just:connect saves log files. There is log file for each just:connect start and for each Channel. It can be found here:
Code Block |
---|
/var/log/justconnect |
Restarting just:in Engine Linux and just:connect
These commands restart just:in Engine Linux and just:connect. They must be executed as root ('sudo').
just:in Engine Linux | sudo systemctl restart tme |
---|---|
just:connect | sudo systemctl restart tjc |
just:in Engine Linux & just:connect | sudo tme restart |
Software Updates
Info |
---|
→ contact us before updating the system. |
You can update the entire system with the following commands. They must be executed as root ('sudo').
Entire System | sudo yum update |
---|---|
TOA Related Packages | sudo yum update toa-media-engine |
sudo yum update toa-confifg |