| Table of Contents |
|---|
...
Start the Just Out and Just Connect applications and confirm/apply all system-related requests.
Start the Just Control application, which will automatically display the User Login window. We recommend keeping the defined username for now.
Click on the “Login” button.
Once the Just Out and Just Connect applications have been started (as described in step 1) and you want to run all applications on one machine, make sure to enter the IP Address “127.0.0.1”, keeping the same Channel Port Number (5000), before clicking on the “Connect” button. This allows you to test and configure your setup independent of your network infrastructure. For final production/On-Air setups, we recommend using the IP Address provided by your network administrator.
Make sure the option New Channel is selected, and enter the name of the Channel into the “New Channel” name field.
Select the Format you would like to use for broadcast (Example: 1080i25 8 Bit) and make sure to select a 8bit mode in case the final output is NDI®, SRT or UDP.
Select the option just:live for live playout.
When running Just Out, Just Connect, and Just Control on the same machine, please enter the IP Address “127.0.0.1” under the section “The channel's primary engine is installed here” to ensure proper testing operations. Keep the same Engine Port Number (5509).
If there is a dedicated Video device, select AJA or Blackmagic, otherwise, keep the Virtual option selected, or, select one of the available streaming options.
Change the Repository Folders if desired. The default Repositories are:
Video files:
/Users/yourUserName/VideosGraphic files:
/Users/yourUserName/PicturesAudio files:
/Users/yourUserName/MusicPlaylist files:
/Users/yourUserName/Documents/Playlists
Selecting the “Include Simple FX layer with station and live bugs” checkbox loads two TOA Demo still images automatically as Channel Station ID Bug and Live Input Bug. This feature can also be (de)activated after the initial setup, and the still images can be changed once the installation is done.
Click the “Configure” button to finish the setup. The Just Control user interface should look similar to the picture below.
...
In Just Connect the Status of the Channel should be “Playing”, with a 🟢 (Green) indicator.
In the just:live interface, the Buffer below the Preview/On Air window should be higher than 50% and the CTI (Current Time Indicator) in the timeline should be 🟢 (Green). The timecode in the On Air window shows the actual time and is changing constantly without stuttering.
...