...
You can create and use different Users and each of these Users can have multiple Templates. In Just Control, you can save the connected Devices (i.e. just:in mac engines) and the look and feel of the multi- Multi viewer (Channel Viewer Area).
With that said, you can have Template A, which has the necessary Devices and multi- Multi viewer settings for Show/Production A, and Template B for Show/Production B. These Templates can be applied either to a Single User or to different Users. In this chapter, you will learn how to create, adjust, and save Users and Templates.
...
Upon the start of Just Control, you will be asked for a specific Username, Password, and Multi - viewer Layout Template.
| Info |
|---|
Please note that:
|
...
After this step, you can add a new or an existing Device for this new User and for the new Template. Enter the IP Address of a Device into the “IP Address” field and use the “Connect” button to proceed.
...
If you connect to a new Device, the Device Wizard will guide you through the setup process and if you connect to an existing Device, all available Channels will be connected to the multi- Multi viewer area automatically. In the example below, two Channels (VD_1 and VD_2) got connected.
...
The settings of the previous Template will be copied to the new Template and you can start to modify it now. Add, remove, or adjust Devices and set up the multi- Multi viewer area for the new Template. All changes will be saved automatically.
...
| Info |
|---|
If you change the Username here, you will see different multi- Multi viewer Layout Templates. |
Modify existing Users and Templates
Existing Users and Templates can be modified within the Preferences of Just Control. Make sure that you are logged in with a User and open the Preferences (Just Control Menu -> Preference option or with the keyboard shortcut “Cmd Command + ,”) and switch to the “Users” tab.
...
Within the Users table on the left side, you can see all existing Users for that machine, and within the Multi viewer layouts table on the right side, you can display all existing Templates for the selected User. You can delete a Template or User by selecting the User or the Template and by pressing the “Backspace” key on your keyboard.
...