Versions Compared

Old Version 8

changes.mady.by.user Manuel Grund

Saved on

compared with

New Version 9

changes.mady.by.user Manuel Grund

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Table of Contents

...

When starting Just Control for the first time (or when adding a new Channel) you can use the Channel Wizard to create a Channel.

  1. Make sure to start Just Out and Just Connect from the Dock or the Just Playout folder first.

  2. Then start Just Control, which will automatically display the Admin User Wizard. We recommend keeping the defined username for now. Press "Login".

  3. The Device Wizard opens and shows the local IP address and the Port which will be used by the Device. If the Just Out and Just Connect applications are running on different machines, you can type in the IP address of the other machine in the “IP Address” field. Otherwise, do not change the settings here!

  4. Verify that Just Out and Just Connect are running on the local (or remote machine) and click on the “Connect”button. Once a Just Out engine has been recognised, the Playout Channel Wizard will be opened.

...

  1. Make sure to start Just Out and Just Connect from the Dock or the Just Playout folder first.

  2. Then start Just Control, which will automatically display the Admin User Wizard. We recommend keeping the defined username for now. Press "Login".

  3. The Device Wizard is opened and shows the local IP address and the Port that will be used by the Device. In case Just Out and Just Connect are running on a different machine, you can type in the IP address of the other machine here.

  4. Verify that Just Out and Just Connect are running on the local (or remote machine) and click on the “Connect”button. Once a Just Out engine has been recognised, the Playout Channel Wizard will be opened.

  5. Click on the “Restore Channels from backup” checkbox at the top.

    Image RemovedImage Added


    Copy the folder with the Channel Backup to the machine so that you can select the folder with the backup here in the Channel Wizard. Do NOT select single Channel Backup files.

  6. After selecting your Channel Backup Folder click “Apply” to rebuild the Channel and to start Just Control.

Warning

You will need a temporary licenselicence to activate Just Connect. Customers with a valid maintenance contract using the latest version of our playout solutions can obtain a temporary activation code → hereby contacting our Sales department at sales@toolsonair.com.