Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Table of Contents

Important: Before Installation

Note

Applications from All ToolsOnAir applications for macOS are provided as a Apple-compliant disk image images (.DMG format). To open the disk image, the Security settings of the system must be changed.macOS may need to be adjusted.

When using macOS Monterey (12.7.x):

  1. Open the System Preferences application.

  2. Go to Security & Privacy.

  3. Click on the General tab.

  4. Authorise yourself to Unlock the Preference Panepane.

  5. Change the setting to Allow allow apps downloaded from App Store and identified developers.

    Image Removed


    Image Added

When using macOS Ventura (13.6.x) or macOS Sonoma (14.x):

  1. Open the System Settings application.

  2. Go to “Security & Privacy”.

  3. Scroll down until you see the “Security” section.

  4. Verify that the “App Store and identified developers” option is selected.

    Image Added

If you are upgrading from an older version of just:liveplay, you might want to make sure that you have a valid v.5.x activation code for this machine before installing the new version.

...

  1. The latest version of just:play is freely available forDownload via the dedicated solution page. Current customers (with account credentials) may also use the download area in the ToolsOnAir Support System.

  2. Open the disk image, review the End User License Agreement (EULA), and confirm by clicking on “Agree” to proceed. You are presented with the Installer Overview page.

    Image RemovedImage Added

  3. Review the linked documents provided in the “Read Before Installing” section, especially the “Important Notes Read Me First” document.

  4. Run Run the TOA System Checker application(“Run Before Installing” section) and follow the displayed instructions. Solve Review and verify all errors and warnings before continuing.

  5. Download and install the Apple Pro Video Formats Codecs by following the link provided in the “Run Before Installing” section on every Mac running TOA ToolsOnAir playout applications (Just Out, Just Connect, Just Control).

...

  1. Drag the Just Playout folder from the disk image to the Applications folder. This will install all relevant playout software applications.

  2. Eject the disk image afterwards (Command-E).

  3. Open a Finder window and navigate to the Just Playout folder inside your Applications folder.

    • Just Out provides the final output (Virtual, SDI or NDINDI® stream). It renders the frames in realtime either on the host GPU (Graphics) or CPU (video file decoding) and should never be quit during playout operations. For more information, please visit: [v5] 8. Just Out (v.5.x)

    • Just Connect acts like a database by channel manager, receiving and distributing all the information related to a playout channel. It interconnects to all Just Out engine(s) and Just Control user interface(s) which are related to a particular channel managed by Just Connect. For more information, please visit: [v5] 9. Just Connect (v.5.x)

    • Just Control: is the unified user interface for all ToolsOnAir applications. During the setup, the administrator can define which one of the two available solutions/user interfaces, namely just:live or just:play should be used for a certain specific channel. For more information about the just:play interface, please visit: [v5] just:play v.4 5 User Interface Manual

  4. Add (Drag & Drop) the applications Just Out, Just Connect and Just Control to your Dock.

4. Configuration

Info

To perform an easy and a straightforward starting setup, we recommend running Just Out, Just Connect and Just Control on the same machine (Mac). For more information about advanced setups with multiple machines distributed over the network, please refer to the [v5] 6. Setup Variants (v.5.x)

  1. Start Start the Just Out and Just Connect applications and confirm/apply all system-related requests.

  2. Start the Just Control which  application, which will automatically display the User Login window. We recommend keeping the defined user name username for now.

    Image Removed
  3. Click on the Login button.

    Image Added

  4. Once the Just Out and Just Connect applications have been started (as described in step 1) and you want to run all applications on one machine, make sure to enter the IP - Address “127.0.0.1”, keeping the same Channel Port Number (5000), before clicking on the “Connect” button. This allows you to test and configure your setup independent of your network infrastructure. For final production/On-Air setups, we recommend using the IP -Address address provided by your network administrator.

  5. Make sure the option New Channel is selected, and enter the name of the Channel into the name of the Channel into the New Channel's name field.

    Image RemovedImage Added

  6. Select the Format you would like to use for broadcast (Example: 1080i25 8 Bit).

  7. Select the option just:play for 24/7 scheduled Master Control playout.

  8. When running Just Out, Just Connect, and Just Control on the same machine, please enter the IP - Address “127.0.0.1” under the section “The channel's primary engine is installed here” to ensure proper testing operations. Keep the same Engine Port Number (5509).

  9. If there is a dedicated Video device, select AJA or Blackmagic, otherwise, keep the Virtual option selected.

  10. Change the Repository Folders if desired. The default Repositories are:

    • Video files:
      /Users/yourUserName/Videos

    • Graphic files:
      /Users/yourUserName/Pictures

    • Audio files:
      /Users/yourUserName/Music

    • Playlist files:
      /Users/yourUserName/Documents/Playlists

  11. Activating the “Include Simple FX layer with station and live bugs” checkbox loads two TOA - Demo still images automatically as channel bug and for live inputChannel Station ID Bug and Live Input Bug. This feature can also be (de)activated after the initial setup and the still images can be changed once the installation is done.

  12. Click the “Configure” button to finish the setup. The Just Control user interface should look similar to the picture below.

    Image RemovedImage Added

Warning

If the user interface displayed differs from the picture above, please follow the steps below:

...

  1. In the sidebar, click on the Connections icon.

    Image RemovedImage Added

  2. Drag the previously created Channel from the Connections list onto the empty viewer area.

  3. The connection should now be established, and Just Control looks similar as shown in this screenshot.

5. Accessing the just:play User Interface

  1. Click the button in the middle of the viewer to open the just:play user interface.

    Image RemovedImage Added

  2. The just:play user interface will now be displayed.

6.

...

 Verify that your Channel is

...

operational

It may take several seconds before the Channel is running.

  1. In Just Connect the Status of the Channel should be PlayingPlaying”, with a Green light indicator.

    Image RemovedImage Added

  2. In Just Play the the just:play interface the Buffer should be higher than 50% and the CTI (Current Time Indicator) should be Green (indicating the actual time).

7. Read the User Manual

You can find it here or in the Help menu of just:play.

...