Versions Compared

Version Old Version 12 New Version 13
Changes made by

Manuel Grund

Manuel Grund

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Table of Contents

...

  1. Start the Just Out and Just Connect applications and confirm/apply all system-related requests.

  2. Start the Just Control application, which will automatically display the User Login window. We recommend keeping the defined username for now.

  3. Click on the Login button.

  4. Once Just Out and Just Connect applications have been started (as described in step 1) and you want to run all applications on one machine, make sure to enter the IP-Address “127.0.0.1”, keeping the same Channel Port Number (5000), before clicking on the “Connect” button. This allows you to test and configure your setup independent of your network infrastructure. For final production/On-Air setups, we recommend using the IP Address provided by your network administrator.

  5. Make sure the option New Channel is selected, and enter the name of the Channel into the “New Channel” name field.

  6. Select the Format you would like to use for broadcast (Example: 1080i25 8 Bit).

  7. Select the option just:live for live playout.

  8. When running Just Out, Just Connect, Just Control on the same machine, please enter the IP-Address “127.0.0.1” under the section “The channel's primary engine is installed here” to ensure proper testing operations. Keep the same Engine Port Number (5509).

  9. If there is a dedicated Video device, select AJA or Blackmagic, otherwise, keep the Virtual option selected.

  10. Change the Repository Folders if desired. The default Repositories are:

    • Video files:
      /Users/yourUserName/Videos

    • Graphic files:
      /Users/yourUserName/Pictures

    • Audio files:
      /Users/yourUserName/Music

    • Playlist files:
      /Users/yourUserName/Documents/Playlists

  11. Activating the “Include Simple FX layer with station and live bugs” checkbox loads two TOA-Demo still images automatically as channel bug and for live inputChannel Playout Bug and Live Input Bug. This feature can also be (de)activated after the initial setup, and the still images can be changed once the installation is done.

  12. Click the “Configure” button to finish the setup. The Just Control user interface should look similar to the picture below.

Warning

If the user interface displayed differs from the picture above, please follow the steps below:

  1. In the sidebar, click on the Connections icon.

    Image RemovedImage Added

  2. Drag the previously created Channel from the Connections list onto the empty viewer area.

    Image RemovedImage Added

  3. The connection should now be established, and Just Control looks similar to this screenshot.

5. Accessing the just:live User Interface

  1. Click the button in the middle of the viewer to open the just:live user interface.

    Image RemovedImage Added

  2. The just:live user interface will now be displayed.

6. Verify your Channel is working properly

...

  1. In Just Connect the Status of the Channel should be Playing, with a Green light.

  2. In Just Livethe just:live interface, the Buffer should be higher than 50% and the CTI (Current Time Indicator) should be Green. The timecode in the On Air window is showing shows the actual time.

7. Read the User Manual

You can find it here or in the Help menu of just:live.

...