General
The Using the Blackmagic ATEM Event Device can be used for following tasks:
...
which can be performed , you can perform the following tasks on a Blackmagic Design ATEM Live Production Switcher.
...
Devices
Select the “Blackmagic ATEM (Ethernet)” Device from the “Device & protocol” list, enter the IP address of the Blackmagic Design ATEM production switcher, and press the “Add…” button to create the Device. Further configuration will be done within the Recording Event itself. Please see refer to the screenshots below:
...
Presets
Set To create a new Preset, define a name for the Preset, select “Blackmagic ATEM” and press “Add”.
...