| Table of Contents |
|---|
Configure the Linux Hardware
All Linux-related settings like such as network configuration and storage settings should be handled by a certified ToolsOnAir partner . After thator ToolsOnAir support engineer. Subsequently, it is normally not rarely required to change any just:in linux related settings on the appliance, as every setting can be done performed via the macOS based Just Control client.
Number of available SDI channels
The number of the available SDI Channels depends on the specific just:in linux appliance. These are the appliances currently available:
...
Please note, that it is possible to handle specific channel/project requirement requirements as well. Therefore please Please contact us directly for more information.
NDI®5 and SRT Inputs
Additionally In addition to the available SDI (or HDMI) inputs, it is possible to add NDI®5 or SRT input channels at any time. This can be done within the macOS-based Just Control configuration Configuration panel. Depending on the given license acquired licence key, additional NDI®5 and/or SRT channels can be used alongside physical inputs such as SDI or HMDIHDMI.
Additional PCIe Cards
Depending on the just:in linux appliance, there are one or multiple PCIe slots available to add fibre channel or additional ethernet cards to connect specific storage systems to the just:in linux appliance.
| Info |
|---|
ThePlease note that the just:in linux appliances have are shipped with two onboard 10Gbit RJ45 ports (JIL4 and JIL8). |
Internal RAID
Every just:in linux appliance includes an internal RAID. The RAID level and the size of the internal RAID depend on the appliance itself and the given settings. The internal RAID can be used as the main recording location or as a fallback path.
The just:in linux server has an internal RAID configured, which is handled by a dedicated RAID controller. The internal RAID is mounted at:
...
The internal RAID of every just:in linux server can be mounted on any SMB client within the same network. On macOS clients, it can be mounted such as:
...
Just Control installation (separate
...
Apple hardware required)
Just Control can be downloaded separately. Please consult the regular installation procedure described in the appropriate User Manuals.
Alternatively, you can mount /media/internal_raid/tools at on your macOS client Finder and copy the Just Control application from there.