...
When using the ToolsOnAir GPI Box you need to select Service USB as the I/O Device.
Note |
---|
Make sure that the ToolsOnAir GPI Box (Service USB Box ) is connected via USB to the machine running live:cut machine (Just Control) and that the correct Service USB driver is installed. |
...
Blackmagic Design ATEM
Note |
---|
Before selecting this I/O device make sure the Blackmagic Design ATEM software is installed on the machine running live:cut (Just Control). |
Enter the Host IP address of the Blackmagic ATEM device and press the Apply button. If you're being asked to update the Project Template accept it.
...