...
Scheduling: Type of user interface (either Defines the user interface which will be used for this Channel, which can either be just:live or just:play) which will be used once the Channel has been opened in Just Control.
Output Format: This is the format (pixel size, frame rate and bit depth) which is used by the selected channelChannel.
Live Input & Fill+Key: Here Allows you can to define if the engine should be able to switch to a live source or not and if the output should include a key signal or not.
Input
No in: The ability to switch to a live source is disabled.
DSK in: Enables the ability to switch to a Live Signal using the DSK of a supported AJA device (refer to chapter Live Signal Handling).
Buffered in: Enables the ability to switch to a Live Signal using the built in capture engine (refer to chapter Live Signal Handling and chapter Non DSK-Based Switch to Live Configuration).
Output
Video out: All available outputs show the video signal
Video+key out: The available SDI outputs show the video signal and at least one shows the key signal.
Default Output
Black: In case nothing is playing in the video track, the output shows black.
Pass-through: In case nothing is playing in the video track, the output shows the incoming live signal.
SD widescreen (16:9): Activate this checkbox for a standard definition channelChannel, to play out in widescreen.
Low latency playout: Enable this option for the lowest latency when pressing the Play (jump to next) button. Deactivate this option when using MXF files or Videos which are taking some time to decompress like XDCam or H.264.
Interlaced Aware Scaling: When activated, any Video which has to be scaled (SD ↔ (U)HD, aspect ratio conversion) will have additional interlaced-aware filtering applied to it in order to preserve the interlace fields and to improve the quality of the scaled Video.
Audio in multi-viewer: Defines the number of audio channels Channels which are shown in the On Air window.
Port: Defines the Port which is used by the selected channelChannel. Please keep in mind that a port can only be used once per machine.
Aspect Ratio Options: Define how differences of the aspect ratio should be handled by default. This preset can be overwritten for each Video in the Inspector of just:live/just:play. Refer to chapter Aspect Ratio Control.