...
...
...
...
...
...
...
...
...
...
Using the Keyboard to
...
control just:live
It is possible to use the keyboard to control just:live using the function keys found at the top of the keyboard.
...
| Action | Key |
|---|---|
| Load | ctrl |
| Load & Play | alt |
| Play Layer 1 (VO1) | F1 |
| Play FX Layer 1 (FX1) | F2 |
| Play FX Layer 2 (FX2) | F3 |
| Play FX Layer 3 (FX3) | F4 |
| Play FX Layer 4 (FX4) | F5 |
| Set In-Point | F6 |
| Rewind Preview | F7 |
| Stop Preview | F8 |
| Fast Forward Preview | F9 |
| Set Out-Point | F10 |
Using the Contour ShuttlePro V2 to
...
control just:live
| Note |
|---|
If you intend to use the shuttle device do not install the Contour drivers. When the drivers are installed it is not possible for just:live to properly communicate with the shuttle device. |
Using the Avid (Euphonix) MC Transport to
...
control just:live
| Info |
|---|
Before continuing verify if there's an EuControl icon in your menu bar to the left of the clock. And it should be green and not black to indicate that the MC Transport device is properly installed. |
...
EuControl Default Configuration
...
Number Pad Configuration
In this screenshot of the EuControl Settings you can see that the "+" and "-" buttons are mapped to move a selection up or down in the Workbench.
...
Soft Keys Configuration
The six soft keys are mapped like seen in this screenshot.
...
Transport Wheel Configuration
- The transport wheel consists of a jog wheel, a shuttle wheel and seven keys.
- The jog and shuttle wheels are used to control the Preview in just:live (jog frame-by-frame, shuttle the preview playback speed between -8x and +8x speed).
- You need to assign keys to both wheels in order to activate them.
- Therefore the first two keys on the wheel (clockwise, left-to-right) are assigned to jog and shuttle. They are active by default, meaning that their LEDs will be turned on when just:live starts. The user can press either or both of these keys to toggle the wheels on and off. For example, if the user wants to use the shuttle and be sure that the jog wheel is inactive, he can press the jog button so that its LED is turned off and the jog wheel is deactivated.
- The third key is not currently assigned.
- The other four keys are stop, play, set in point and set out point. All of them relate to the preview.
