Date: Fri, 29 Mar 2024 14:08:18 +0000 (UTC)
Message-ID: <792165014.11.1711721298222@b440a410feea>
Subject: Exported From Confluence
MIME-Version: 1.0
Content-Type: multipart/related;
boundary="----=_Part_10_926120358.1711721298221"
------=_Part_10_926120358.1711721298221
Content-Type: text/html; charset=UTF-8
Content-Transfer-Encoding: quoted-printable
Content-Location: file:///C:/exported.html
Just In 3.0.3.GM.779 Release Notes
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- The "Automatically reset fade next" live:cut project setting is now cor=
rectly respected. When disabled, and fade to next is enabled, it is no long=
er cleared after the next fade.
Just In 3.0.3.GM.778 Release Notes
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- Fixed a bug that resulted in the Computer Time timecode source be=
ing behind after the signal was lost and then came back. Now, when t=
he signal comes back the timecode is synchronised again with the computer c=
lock.
Just In 3.0.2.GM.777 Release Notes
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- Fixed a crash when more than one just:in linux device is active i=
n the configuration panel and the currently active device is changed=
.
- Resolved a bug where activating a just:in linux channel by clicking the=
activation checkbox without first selecting the channel w=
as updating the activated channel with the selected channe=
l's settings, causing unexpected behaviour and conflicts (e.g. duplicate po=
rts).
Just In 3.0.2.GM.776 Release Notes
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- When changing just:in linux channel settings (e.g. preview qualit=
y or size) and then selecting another channel without activating the channe=
l first, the settings are preserved instead of being discarded.
- When creating new just:in linux channels with AJA selected as the input=
, the "Restart channel if not recording" on signal loss setting is automati=
cally enabled, and it is no longer possible to disable it. This is required=
to ensure that channel and preview remain synchronised after a signal loss=
.
Just In 3.0.2.GM.775 Release Notes
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- It is now possible to remove channels in the connection panel whe=
n they are in the "Connecting..." state but not yet connected. This =
is sometimes necessary when the channel's IP or port is incorrect, or chang=
ed, or the channel is no longer running.
Just In 3.0.2.B1.774 Release Notes
- This is a 3.0.2 Beta pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- Fixed a bug that could cause just:in Multi to crash when de-activ=
ating and activating just:in mac channels.
- Channel previews are now capped at a maximum of 30fps, entering higher =
values will reset automatically to 30.
- Resolved an issue where the preview for a just:in mac channel was not w=
orking when the system running just:in mac did not have an Ethernet router =
configured.
- The just:in linux preview settings have been updated to match the just:=
in mac settings.
Just In 3.0.2.B1.773 Release Notes
- This is a 3.0.2 Beta pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- The "Restart channel if not recording" just:in linux option is no=
w correctly updated and saved after re-starting the channel.
- Added new preview option to the just:in linux configuration panel, incl=
uding preview size and frame-rate.
- Fixed a bug that sometimes resulted in incorrect timecodes when recordi=
ng to MXF.
- It is now possible to encode ProRes when recording to MXF.
Just In 3.0.1.GM.772 Release Notes
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- The "Restart channel if not recording" just:in linux option is no=
w correctly updated and saved after re-starting the channel.
- Fixed performance issues and unexpected behaviour related to recording =
with AVFoundation with just:in mac.
Just In 3.0.1.B1.771 Release Notes
- This is a 3.0.1 Beta pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- Please note that this build is not compatible with just:in Linu=
x. If you are using just:in Linux, please use version 3.0.0.B1.750.
- There is a new "Do not write caption to container" option for cap=
ture presets, with the default set to off. Enabling this option will=
prevent any closed captions being written to the container even if the inp=
ut signal has closed captions.
- Fixed a bug that could lead to incorrect scheduled events being display=
ed in the inspector (e.g. scheduled events from other channels than the cur=
rently selected channel).
- Fixed a bug that could lead to incorrect batch jobs being displayed in =
the inspector (e.g. batch jobs from other channels than the currently selec=
ted channel).
- When the channel's toolbar is switched to show the current filename and=
the channel is in scheduled mode, the toolbar now displays either the name=
of the currently recording scheduled event, or "No schedule event" if the =
channel isn't currently recording.
Just In 3.0.1.B1.770 Release Notes
- This is a 3.0.1 Beta pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- Please note that this build is not compatible with just:in Linu=
x. If you are using just:in Linux, please use version 3.0.0.B1.750.
- It is now possible to add "SCC Caption" paths to a destination pr=
eset in the just:in linux configuration panel.
- It is no longer possible to resize the just:in linux configuration pane=
l.
- When closing a live:cut project, the markers drawer is automatically cl=
osed if it is open.
- A live:cut project recording p2997 or p30 now generates correct Final C=
ut 7 / Final Cut X progressive sequences, not interlaced.
- When a channel preview's toolbar is switched to show the channel's curr=
ent filename, the filename is now updated when changes are made in the insp=
ector.
- Fixed a bug that could lead to incorrect colours being used on a popup =
menu after closing it.
- It is now possible to click on the large, medium and small single timec=
odes to switch between current time and recording duration.
Just In 3.0.0.GM.761 Release Notes
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- Please note that this build is not compatible with just:in Linu=
x. If you are using just:in Linux, please use version 3.0.0.B1.750.
- When opening an existing live:cut project, the inspector is close=
d automatically if it is open and all channel previews are "disabled" (grey=
ed out) while the project is open.
Just In 3.0.0.GM.760 Release Notes
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- Please note that this build is not compatible with just:in Linu=
x. If you are using just:in Linux, please use version 3.0.0.B1.750.
- Added a new "MXF Write Block" parameter to the channel settings in just=
:in Mac. This setting can be used to tune MXF writing for specific storage =
requirements, but should only be changed with care as it may lead to unexpe=
cted results including write errors.
Just In 3.0.0.GM.759 Release Notes
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- Please note that this build is not compatible with just:in Linu=
x. If you are using just:in Linux, please use version 3.0.0.B1.750.
- Fixed a bug that could result in just:in Mac performance degrading sign=
ificantly after connecting a second instance of just:in Multi. The second j=
ust:in Multi would display an error that the engine was in use, but within =
a few minutes just:in Mac would start reporting dropped frames.
- Resolved a bug that would leak threads and eventually crash just:in Mul=
ti when a channel regularly lost and then recovered the SDI signal.
- Fixed the text size when displaying errors for a channel in full-screen=
format.
Just In 3.0.0.GM.758 Release Notes
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- Please note that this build is not compatible with just:in Linu=
x. If you are using just:in Linux, please use version 3.0.0.B1.750.
- Fixed a bug that could result in just:in Multi displaying a "No Signal"=
error for a channel that had a valid signal, particularly after starting j=
ust:in Mac while just:in Multi was already running.
- Errors are now better formatted for the given channel preview size, par=
ticularly for very small sizes.
Just In 3.0.0.RC1.757 Release Notes
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- Please note that this build is not compatible with just:in Linu=
x. If you are using just:in Linux, please use version 3.0.0.B1.750.
- Fixed a bug that could have lead to corrupt files being written when re=
cording MXF files.
- It is no longer possible to create a new live:cut project including a c=
hannel that is already recording.
- Updated the links in the "Help" menus for version 3.0.
Just In 3.0.0.B1.756 Release Notes
- This is a 3.0.0 Beta pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- Please note that this build is not compatible with just:in Linu=
x. If you are using just:in Linux, please use version 3.0.0.B1.750.
- Adjusted the width of a schedule event's name in the inspector to preve=
nt overlapping with the event's start time.
- Updated DMG disk image with links to the getting started guides and the=
se release notes.
- Added a new "Restart channel" option after signal loss to just:in Linux=
channel in the configuration panel.
- Fixed a bug that could lead to data loss and decoding errors while reco=
rding XDCAM to MXF and editing in Adobe Premiere.
Just In 3.0.0.B1.755 Release Notes
- This is a 3.0.0 Beta pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- Please note that this build is not compatible with just:in Linu=
x. If you are using just:in Linux, please use version 3.0.0.B1.750.
- Preview now scales correctly for all input modes.
- Reduced the spacing between the digits and separators for timecode inpu=
t fields in the inspector.
- When dismissing an error on a channel during a live:cut recording, a cu=
t is no longer triggered.
- Fixed a bug where disabling the active network connection for longer th=
an about 50 seconds and enabling it again would not result in the preview r=
e-starting.
- Added additional logging in the channel logs related to writing MXF fil=
es.
- Fixed an issue where new channels were not allocated valid ports for th=
e video preview resulting in channels not connecting correctly.
- Resolved a bug that could result in read errors ("red frames") while re=
cording XDCAM to MXF and editing in Adobe Premiere.
- Fixed a crash when adding a new just:in Linux device to just:in Multi's=
configuration if the host or port fields were left empty.
Just In 3.0.0.B1.754 Release Notes
- This is a 3.0.0 Beta pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- Please note that this build is not compatible with just:in Linu=
x. If you are using just:in Linux, please use version 3.0.0.B1.750.
- Simplified the preview options for just:in Mac channels. The resolution=
is now a simple selection between "Low" and "High".
- Updated MXF muxer with improved performance and stability.
Just In 3.0.0.B1.753 Release Notes
- This is a 3.0.0 Beta pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- Please note that this build is not compatible with just:in Linu=
x. If you are using just:in Linux, please use version 3.0.0.B1.750.
- Disconnecting a just:in Mac channel now correctly disconnects the chann=
el instead of leaving the preview running.
- Fixed a bug that sometimes lead to channels being disconnected after st=
arting just:in Multi (previously connected channels would not be re-connect=
ed, and "Connecting..." status in the connection panel).
- Resolved an occasional crash when starting just:in Multi.
- Resolved an occasional crash when quitting just:in Multi.
Just In 3.0.0.B1.752 Release Notes
- This is a 3.0.0 Beta pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- Please note that this build is not compatible with just:in Linu=
x. If you are using just:in Linux, please use version 3.0.0.B1.750.
- Added XAVC Long-gop and Intra presets for p24/25/30/50/60 and i50/60 to=
just:in Mac.
Just In 3.0.0.B1.751 Release Notes
- This is a 3.0.0 Beta pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- Please note that this build is not compatible with just:in Linu=
x. If you are using just:in Linux, please use version 3.0.0.B1.750.
- Changed the naming for AJA input device in just:in Mac. Now the name in=
cludes the serial # and iterator of the channel and board to fix an issue w=
ith the order of the channels being reversed after a system boot. N=
ote you will need to reconfigure your channels once after installing this v=
ersion, after that the configuration should remain stable after each system=
boot.
- Added a new preview quality setting to just:in Mac's channel settings. =
This allows you to balance the preview quality and the network bandwidth us=
ed to stream the preview from just:in Mac to just:in Multi. In addition, th=
e network load is now logged in the channel log.
- Fixed the title bar for just:in Mac's engine preferences.
Just In 3.0.0.B1.750 Release Notes
- This is a 3.0.0 Beta pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- Changed the naming for AJA input device in just:in Mac. Now the name in=
cludes the serial # and iterator of the channel and board to fix an issue w=
ith the order of the channels being reversed after a system boot. N=
ote you will need to reconfigure your channels once after installing this v=
ersion, after that the configuration should remain stable after each system=
boot.
Just In 3.0.0.B1.749 Release Notes
- This is a 3.0.0 Beta pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- Please note that this build is not compatible with just:in Linu=
x. If you are using just:in Linux, please use version 3.0.0.B1.748.
- Resolved several issues and crashes related to the channel preview when=
starting just:in Multi often and/or signal loss with just:in Mac.
Just In 3.0.0.B1.748 Release Notes
- This is a 3.0.0 Beta pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- Resolved a bug using an external LTC audio timecode source where someti=
mes random channels would show timecode starting from 00:00:00:00 instead o=
f the correct LTC timecode.
- Channels with VTR control enabled now correctly show the VTR controls i=
n just:in Multi.
Just In 3.0.0.B1.747 Release Notes
- This is a 3.0.0 Beta pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- Fixed a crash recording an input with closed captions to XDCAM/MXF.
Just In 3.0.0.B1.746 Release Notes
- This is a 3.0.0 Beta pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- Fixed a bug that could lead to unexpected behaviour with an AJA input d=
evice after rebooting the system with the "Reopen windows when logging back=
in" option enabled.
- Made the minimum size of just:in Multi's window slightly larger when in=
a live:cut project.
- Disabled dragging and dropping (reordering) of channels when in a live:=
cut project.
Just In 3.0.0.B1.745 Release Notes
- This is a 3.0.0 Beta pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- Fixed a bug where under certain circumstances just:in Multi was showing=
a "no signal" error although the channel's signal was present again.
- Resolved an issue where values for metadata fields with "reset after re=
cording" enabled were written with the "reset" or "default" values instead =
of the values entered before or during recording.
- The live:cut record/stop buttons are now correct (round record button t=
o start recording, square stop button to stop recording).
- When configuring a live:cut project to use an ATEM switcher, an error i=
s no longer displayed due to the missing host address. Instead, a prompt is=
shown if an attempt is made to close the project settings without first en=
tering an address.
- When changing a live:cut project's input device, it is no longer requir=
ed to "apply" the switcher mappings before closing the project settings.
- Fixed a crash when changing a live:cut project's input device from ATEM=
to any other device.
- A new live:cut project now requires at least two or more channels. It i=
s no longer possible to create a live:cut project with a single channel.
- Resolved a bug after a dissolve from one source to the same source using an ATEM switcher (e.g. dissolving from input 1 to input =
1). These kinds of dissolves are now ignored by live:cut.
- It is now possible to drag and drop a channel's preview when the mouse =
is within the audio bars area but outside of the peaks. As clicking an audi=
o bar peak clears that peak, it is not possible to drag and drop when the m=
ouse pointer is currently on an audio bar's peak area.
- The live:cut status text is now set to "Stopping..." after stopping the=
recording while waiting for all the channels to stop recording.
- While a live:cut project is open, only the selected (active) channel sh=
ows its selected/recording border.
- When a live:cut project is open, just:in Multi's window has a slightly =
larger minimum size and will automatically resize to the minimum if it is c=
urrently too small when creating the new project.
- Fixed a bug where enabling the "auto take counter" and exporting to Fin=
al Cut Pro X was resulting in an error that no files could be found.
- Fixed a bug where splitting or joining a channel could result in the pr=
eview's timecode mode being reset to "large".
Just In 3.0.0.B1.744 Release Notes
- This is a 3.0.0 Beta pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- It is now possible to define metadata items that are "reset" to their d=
efault values when each recording is stopped. On each <control> tag, =
add an attribute with the name "resetAfterRecord", for example <control =
resetAfterRecord=3D"1"> to enable the reset, or <control resetAfterRe=
cord=3D"0"> to disable the reset for the given item. This is also the de=
fault, so ommiting the attribute will disable the reset for the given item.=
This feature is currently only available for just:in Mac, but will be incl=
uded for just:in Linux in the near future.
- For a given just:in Mac channel, it is now possible to change the calen=
dar used by the channel for scheduled recording in the channel settings. Th=
is means that the channel now longer uses its own automatically generated c=
alendar, but rather the specified calendar on the system.
Just In 3.0.0.B1.743 Release Notes
- This is a 3.0.0 Beta pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- Updated copyright and applications now show correct version in Finder.<=
/li>
- Renamed misleading "leading zeros" field in just:in Mac's and just:in L=
inux's naming convention configuration.
- When entering a "stop on timecode" value in the inspector, after closin=
g and opening the inspector the value is restored instead of being reset.=
li>
- After activating and then cancelling a stop on timecode, the record/pro=
perties button in the channel's preview are no longer disabled.
- Fixed crashes starting and/or quitting just:in Mac when an external LTC=
timecode source was enabled.
Just In 3.0.0.B1.742 Release Notes
- This is a 3.0.0 Beta pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- Text fields and popup buttons are now the same size in the inspector.=
li>
- Fixed a bug in just:in Mac that resulted in invalid captions being reco=
rded using a QuickTime capture preset if a frame from the input device did =
not contain closed captions.
- Fixed a bug in just:in Mac that resulted in a crash recording with a AV=
Foundation QuickTime capture preset if a frame from the input device did no=
t contain closed captions.
- When recording closed captions with a AVFoundation QuickTime capture pr=
eset the captions are now shown as english instead of "unknown language" in=
QuickTime Player X.
- After closing a live:cut project it is now possible to select the chann=
els that were included in the live:cut project.
- When creating a new Metaset Set for just:in Linux an error is now displ=
ayed if the XML is invalid and cannot be parsed.
Just In 3.0.0.B1.741 Release Notes
- This is a 3.0.0 Beta pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- Fixed a bug switching to the "2x timecode" mode where the second timeco=
de was hidden until the mouse exited and then entered the channel preview a=
gain.
- When starting a recording with just:in Linux where the channel crashes,=
it is no longer necessary to restart just:in Multi. The channel will autom=
atically exit the recording status once it is restarted.
- Resolved a bug where the "virtual device" did not play the last file in=
the specified folder.
- Editable fields in the Inspector now have an additional underline to di=
fferentiate them from non-editable fields.
Just In 3.0.0.B1.740 Release Notes
- This is a 3.0.0 Beta pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- Both just:in Mac and just:in Linux support a new "leading zeros" proper=
ty when using a counter field in a naming convention. For example, setting =
the leading zeros to 4 would result in a counter field of "0001", "0002", "=
0003" and so on.
- A warning is issued for file conflicts on each new take in live:cut, sh=
ould existing files be found matching the current name, scene and take. Pre=
viously this warning was only shown for the first take.
- Resolved a bug that sometimes lead to "empty" duration and elapsed time=
codes after creating a new live:cut project.
- Improved the reliability of EDL dissolve durations. Due to some jitter =
in the communication, durations may still be +/- a frame compared with the =
dissolve setting (e.g. ATEM transition).
- Timecode fields in live:cut now show the correct dropped/non-dropped ti=
mecode status.
- Resolved a bug that could cause the preview to stall for several minute=
s after a long period with no signal on a just:in Mac channel.
Just In 3.0.0.A1.739 Release Notes
- This is a 3.0.0 Alpha pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- When exporting to Final Cut Pro X, the XML filename now includes the na=
me, scene, take, date and time. This prevents the file being overwritten wh=
en exporting more than once.
- Timecode displays in live:cut are now synchronised with the channel pre=
views when using the just:in timecode provider.
- Updated the look and feel of the live:cut user interface with a new fon=
t.
- Reduced the size of the icons used in the live:cut EDL table.
- The duration for dissolves in live:cut's EDL table are now calculated c=
orrectly.
- Disabled certain menu items (e.g. show Inspector) when a live:cut proje=
ct is open.
- Fixed a bug that showed an incorrect border for channel previews during=
a live:cut project.
- The comment field is now enabled for live:cut projects that export to F=
inal Cut Pro 7.
Just In 3.0.0.A1.738 Release Notes
- This is a 3.0.0 Alpha pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- It is now possible to create AVC-Intra capture presets for all the foll=
owing formats: 720p24, 720p25, 720p30, 720p50, 720p60, 1080p24, 1080p25 and=
1080p30 (both just:in Mac and Linux).
- Fixed a bug where "quicklooking" a channel in a live:cut project was al=
so showing the inspector.
- The live:cut inspector now matches the size of the channel inspector, a=
nd the UI controls no longer overlap with a scaled retina display.
- Resized the just:in Linux configuration panel to allow for 8 channels w=
ithout scrolling the list.
- It is no longer possible to define a empty name for a naming convention=
. If "name" is left empty, then "Name" is automatically substituted.
- When starting just:in Multi, the previously selected channels and the s=
tatus of the inspector are restored.
- The currently active live:cut channel is now selected (shows the select=
ed border).
Just In 3.0.0.A1.737 Release Notes
- This is a 3.0.0 Alpha pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- During a live:cut project, any channels not included in the project are=
now "darkened" to highlight this fact.
- Updated the live:cut user interface with the new look and feel.
Just In 3.0.0.A1.736 Release Notes
- This is a 3.0.0 Alpha pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- Fixed several issues related to the "quicklook" preview and inspector.<=
/li>
- Resizing just:in multi's window with the inspector open now properly si=
zes and positions the inspector.
- Updated color scheme.
Just In 3.0.0.A1.735 Release Notes
- This is a 3.0.0 Alpha pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- Clicking on a channel's audio bars, timecode mode selector or recording=
mode selector now also selects the channel.
- Resolved incorrect inspector groups when selecting multiple channels in=
either schedule or batch capture recording modes.
- The inspector is now updated instead of being closed when a channel is =
disconnected or reconnected.
- The inspector is now correctly configured when selecting channel with d=
ifferent recording modes.
- Clicking on a switcher button in live:cut now selects the correct input=
.
- Added "Initial source" options to the "User Interface" device in live:c=
ut, and for those devices with "Initial Source" settings the correct source=
is selected when starting a live:cut recording.
- Added "Grass Valley EDIUS" to the list of live:cut editors. When select=
ed, a Final Cut XML sequence is saved that can be opened in EDIUS.
- Update live:cut user interface elements for the new 3.0 user interface =
look and feel.
- When clearing a capture preset (by selecting "-" from the list), the de=
stination preset is no longer cleared as well.
- When switching to "quicklook" for a channel by pressing the spacebar, t=
he inspector is now opened if it was closed. Pressing the spacebar again wi=
ll close "quicklook" and the inspector.
Just In 3.0.0.A1.734 Release Notes
- This is a 3.0.0 Alpha pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- Opening and closing the inspector now works slightly differently. As be=
fore, you can open the inspector by clicking on a channel's "settings" butt=
on. Once open, selecting another channel with update the inspector to refle=
ct that channel's settings, including multiple selection. However, selectin=
g no channel by clicking outside of any channel will not close the inspecto=
r, but instead change the title to "No channel selected". To close the insp=
ector, click the "settings" button for any of the currently selected channe=
ls.
- The "quicklook" function activated by pressing the spacebar when a chan=
nel is selected now works with the inspector open or closed, but only when =
a single channel is currently selected.
- Selecting a live:cut input via the menu or keyboard shortcut now select=
s the correct input.
- Exporting the live:cut project to the selected editor is now activated =
using cmd+ctrl+E.
Just In 3.0.0.A1.733 Release Notes
- This is a 3.0.0 Alpha pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- Added a new menu item in the "Channel" menu to clear the audio peaks on=
all selected channels.
- When cmd-clicking the audio bars to clear all peaks, all peaks for the =
channel are now cleared, not just those on the left or right depending on w=
here you are clicking.
- When changing capture preset for a channel, or starting a recording, th=
e audio peaks are now automatically cleared for the channel.
- Removed the channel state border preference. The thickness of the borde=
r is now dependent on the size of the channel's preview.
Just In 3.0.0.A1.732 Release Notes
- This is a 3.0.0 Alpha pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- Fixed a bug where selecting a capture preset with a different number of=
audio channels was not properly resizing the channel's audio bar display.<=
/li>
- Fixed a bug where selecting a capture preset with 2 channels and then o=
ne with 4, 8 or 16 channels was resulting in the channel's timecode display=
changing size.
- Changing the timecode display mode is now reflected on all selected cha=
nnels.
Just In 3.0.0.A1.731 Release Notes
- This is a 3.0.0 Alpha pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- Fixed a bug on non-retina displays that lead to corrupted / unreadable =
audio bar legend labels.
- Fixed a bug where channels were sometimes missing the selection / recor=
ding border indicator.
- It is now possible to click on a "peak indicator" in the audio bars to =
clear it. Holding the command key and clicking will clear all peak indicato=
rs.
- The "buffer level indicator" is now shown again if enabled.
- The "Timecode Off" option now correctly hides all timecodes for the giv=
en channel.
- Fixed a bug that sometimes could lead to the second timecode begin disp=
layed incorrectly (e.g. too small compared to the primary timecode).
Just In 3.0.0.A1.730 Release Notes
- This is a 3.0.0 Alpha pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- Just:in Multi's user interface is undergoing a significant re-design. I=
nitally this includes the "channel preview", including, but not limited to,=
the timecode and audio bar displays. Further changes to the interface will=
follow.
- Improved performance encoding XDCAM.
- Changing the recording "mode" (crash, batch, schedule) is now done for =
all currently selected channels, allowing multiple channels to be changed a=
t once.
Just In 3.0.0.A1.729 Release Notes
- This is a 3.0.0 Alpha pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- H.265/HEVC encoding is now enabled for macOS systems capable of encodin=
g this format.
- The timecode display in the preview has been updated to make it more re=
adable. Note that this is a work in progress and further updates will be co=
ming shortly.
- Added a slight delay in starting just:in engine on macOS after restarti=
ng the system. This is to allow some drivers (e.g. AJA) to complete their s=
tartup before the engine starts.
- Added additional diagnostic logging to just:in multi's log file.
- Added new keyboard shortcuts for creating and closing a live:cut projec=
t.
Just In 3.0.0.A1.728 Release Notes
- This is a 3.0.0 Alpha pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- Resolved a memory leak triggered by opening and closing the inspector a=
nd/or resizing the window.
- Resolved a bug that could result in an incorrect timebase being selecte=
d for a new live:cut project based on a template.
Just In 3.0.0.A1.727 Release Notes
- This is a 3.0.0 Alpha pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- Resolved a memory leak triggered by opening and closing the inspector.<=
/li>
- Users can impact XDCAM encoding quality and performance now. The key is=
defaults write com.toolsonair.justin xdcamEncoderPerformance -integer 0-16=
(0 being fastest and default, 16 the highest quality, slowest).
- Fixed a bug where encoding of uncompressed 10-Bit material would result=
in downconvert to 8-Bit.
- Fixed a bug where resizing just:in multi's window while displaying an e=
rror would result in the "Dismiss" button disappearing.
- The default and maximum clip duration for just:in Linux channels is now=
two hours.
Just In 3.0.0.A1.726 Release Notes
- This is a 3.0.0 Alpha pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- When connecting to a channel without a signal, it is now possible to di=
sconnect the channel using the channel connection panel.
- It is now possible to close all windows using the cmd-W keyboard shortc=
ut. In addition, after closing just:in multi's main window (multi-viewer), =
you can open it again using the cmd-0 keyboard shortcut.
- When connecting to a channel without a signal, the channel's selection =
border is now properly shown and not hidden, making the channel appear unse=
lected.
- When connecting to a channel without a signal, the channel's proper nam=
e is now displayed in the error instead of the IP address.
- When connecting to a channel without a signal it is now possible to dis=
connect the channel without first attaching a signal to the channel.
- Fixed a bug where resizing just:in multi's window would turn a non-dism=
issable error (e.g. "No Signal") into a dismissable one.
- A loglevel was wrong causing excessive logging without debug logging en=
abled. That has been fixed
- When a supported codec is not installed on the system, the codec popup =
will give a warning instead of showing an empty line.
Just In 3.0.0.A1.725 Release Notes
- This is a 3.0.0 Alpha pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- It is now possible to dismiss all errors on a non-selected channel even=
if other channels are currently selected.
- When activating or deactivating a channel in just:in engine's preferenc=
es, the relevant channel is now automatically selected and its properties a=
re displayed.
- When connecting to a channel that is already in use by another user onl=
y the correct error is now displayed (and not any other connection errors),=
and the connection will be re-attempted until the channel becomes availabl=
e. For example, if the user currently using the channel closes just:in, the=
channel will be automatically connected within a few seconds.
- Fixed a bug, where quitting the engine while recording would cause AJA =
devices to disappear from the system and thus require a reboot in order to =
get the AJA hardware back.
Just In 3.0.0.A1.724 Release Notes
- This is a 3.0.0 Alpha pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- Fixed a bug, where channels didn't connect on application startup.
- Repeated errors are no longer displayed in the user interface, as this =
sometimes lead to a situation with dozens or even hundreds of errors and an=
unresponsive interface.
- It is now possible to dismiss all errors for a channel that is not curr=
ently selected.
- Fixed performance issues recording ProRes 1080p59.94.
- Fixed a bug that left the selection empty after selecting "-" as the na=
ming convention.
- Fixed a memory leak related to 10-bit video input.
- All presets and conventions (capture, destination, naming) are now sort=
ed alphabetically in the user interface.
- De-activating and then re-activating a channel in the engine's preferen=
ces no longer resets the selection to the first channel.
- Resolved an issue where stopping a scheduled recording for a repeating =
calendar event was not deleting the currently recording instance of the eve=
nt in the calendar.
- Fixed a bug, where encoding NTSC with AVF-Containers, the recording wou=
ld stop after approximately 10min.
- The cmd-j keyboard shortcut for joining has been switched to shift-cmd-=
j.
- The cmd-s keyboard shortcut for splitting has been switched to shift-cm=
d-s.
- Fixed a crash while recording a live:cut project after the previous pro=
ject was closed without exporting.
- Pressing the spacebar in the live:cut "Comment" text field no longer "z=
ooms" the selected channel.
- The filename previews in live:cut Project Settings now update automatic=
ally after changing any of the related settings.
Just In 3.0.0.A1.723 Release Notes
- This is a 3.0.0 Alpha pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- Stopping a live:cut recording no longer hangs the application requiring=
a "force quit" if one or more channels were stopped during the recording (=
e.g. a crash or signal loss).
- It is no longer possible to open multiple live:cut Project Settings pan=
els.
- Text fields in the live:cut Project Settings panel (e.g. "ATEM Host IP"=
) are now properly saved when closing the panel instead of being lost.
- If changes have been made to the switcher mappings in the live:cut Proj=
ect Settings panel, you are now prompted to apply or revert them before clo=
sing the panel.
Just In 3.0.0.A1.722 Release Notes
- This is a 3.0.0 Alpha pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- When editing live:cut project settings for a project based on a templat=
e, you are now prompted to update the template as well.
Just In 3.0.0.A1.721 Release Notes
- This is a 3.0.0 Alpha pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- The live:cut Project Settings panel is now a "modal" panel, not a float=
ing window.
- When a live:cut project starts recording, a timeout is now in effect if=
one or more channels do not start recording. In this case an error is disp=
layed and the recording stops.
- When creating a new live:cut project, the selected channels are now val=
idated for certain errors and warnings. If errors are detected, they are di=
splayed and the project is not created. If warnings are detected, they are =
displayed and the user can choose to cancel or continue with the project.=
li>
Just In 3.0.0.A1.720 Release Notes
- This is a 3.0.0 Alpha pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- Virtually all live:cut settings (markers, keyboard shortcuts, switcher =
mappings etc.) are now part of the live:cut project. The advantage of this =
is that it is possible to save different project templates and switch betwe=
en them. As a consequence all of the live:cut settings have now been moved =
from the Preferences panel to the live:cut Project Settings panel. Old sett=
ings are automatically saved to the "Migrated" project template. When start=
ing live:cut, select this "Migrated" project template to re-activate any pr=
evious settings.
- Fixed a bug that could cause incorrect timecodes to be displayed by liv=
e:cut after opening the Project Settings panel.
Just In 3.0.0.A1.719 Release Notes
- This is a 3.0.0 Alpha pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- It is now possible to define custom keyboard shortcuts for adding marke=
rs to a live:cut project.
- Fixed incorrect 24 timebase for a multi-clip sequence exported to Final=
Cut / Premiere when the inputs are in the 23.976 timebase.
- The inspector is now hidden if open when creating a new live:cut projec=
t.
- Fixed a crash exporting from live:cut when one or more of the media fil=
es was invalid.
Just In 3.0.0.A1.718 Release Notes
- This is a 3.0.0 Alpha pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- A live:cut project now supports upto 24 cameras/channels instead of 16.=
- Some live:cut-related menu items were always disabled, now they are pro=
perly enabled.
- Fixed a crash after changes the live:cut sequence colour via the "Proje=
ct" menu.
- It is now possible to close a live:cut project via the "Project" menu, =
returning the interface to its normal "just:in" state.
- Added channel names to all relevant menus (e.g. audio and sequence expo=
rt options and "Switcher" menu) to make it easier to select the correct cam=
era/channel.
Just In 3.0.0.A1.717 Release Notes
- This is a 3.0.0 Alpha pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- Resolved an issue whereby changing the Name/Scene/Take metadata fields =
in a live:cut project was not reflected in the recorded filenames, and ther=
efore to a failed export.
- Added additional logging during a live:cut project.
- The just:in user interface now automatically installs the Tools On Air =
System Preferences panel. You can use this panel to generate a TOA "System =
Profile" when reporting issues.
- The TOA "System Profile" now includes live:cut documents and settings.<=
/li>
Just In 3.0.0.A1.716 Release Notes
- This is a 3.0.0 Alpha pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- Fixed a bug that resulted in dissolves being ignored (not recorded) in =
a live:cut project.
- It is now possible to change the "Export Options" in live:cut's project=
settings panel.
- Resolved an issue that sometimes led to an error saving a new live:cut =
project (or after stopping recording an existing project).
- Fixed a bug that resulted in too many angles being added to a restored =
live:cut project (or a new project based on a template).
- Added additional logging when exporting to Final Cut 7 XML.
Just In 3.0.0.A1.715 Release Notes
- This is a 3.0.0 Alpha pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- Fixed a bug, where encoding NTSC with AVF-Containers, the recording wou=
ld stop after approximately 10min.
- The underlying live:cut project format has been updated to a new, human=
-readable JSON text format. New live:cut projects now have the file extensi=
on ".lcproj" instead of the old ".livecut". Older project files can no long=
er be opened by this version of live:cut. If you need to open older project=
files, please contact Tools On Air directly.
- Fixed a bug where opening just:in's preferences could result in invalid=
timecodes (e.g. jumping timecodes in the previews) and corrupt live:cut pr=
ojects.
Just In 3.0.0.A1.714 Release Notes
- This is a 3.0.0 Alpha pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- Fixed a crash exporting to Final Cut Pro X.
- Fixed a crash on some system when displaying the stop recording window.=
- Fixed a crash creating a new live:cut project if any of the default pat=
hs were invalid.
- When creating a new live:cut project, a warning is displayed if the hig=
h-res media path already contains files matching the current live:cut setti=
ngs.
- When connected to an ATEM input device, selecting inputs in the user in=
terface will reverse-map to the correct ATEM input as specified in the devi=
ce mappings.
- Dissolves are now enabled for the user interface input device, so you c=
an dissolve and well as cut between inputs.
Just In 3.0.0.A1.713 Release Notes
- This is a 3.0.0 Alpha pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- Removed an incorrect log related to frame-rate.
- When starting just:in Engine for the first time, or when the network in=
terfaces change, you must now select a specific network interface before th=
e channels can be started. In this case, the preferences panel will be open=
ed automatically and the network interfaces selection highlighted. Once a n=
etwork interface has been selected, the channels will automatically start. =
In addition, the network interface has been removed from the channel settin=
gs. This is to prevent inconsistent configuration that could lead to the ch=
annel's preview, timecode and audio bars not working correctly in the user =
interface.
- Fixed a bug that could lead to some warnings or errors being dismissed =
when resizing just:in Multi's window.
- When a channel quits unexpectedly, it will now be restarted automatical=
ly. If the channel then quits unexpectedly again within a short time (due t=
o, for example, faulty hardware), the channel will be restarted up to 5 tim=
es and then disabled. In addition, the preferences panel and channel status=
windows are now updated to propertly reflect the current status of the cha=
nnel.
- While recording, if a channel consumes more than 3GB (most likely due t=
o performance issues) then the recording will automatically stop and an err=
or displayed in the user interface.
- The inspector is now always shown to the right of the channels, "squeez=
ing" the channels together, regardless of whether one or multiple channels =
are selected.
- Improved logging, some logs that were previously sent to the system log=
are now sent to the relevant just:in log.
- Fixed a bug that could result in an incorrect channel status being disp=
layed in the channel connect panel after joining previews.
Just In 3.0.0.A1.712 Release Notes
- This is a 3.0.0 Alpha pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- Improved live:cut logging.
- Fixed a bug that resulted in calculation errors for timecodes in 23.976=
and 59.94 frame-rates.
- It is now possible to record live:cut projects using 23.976 and 24 fram=
e-rates.
- It is no longer possible to remove a channel from the channel connect p=
anel unless the channel is currently disconnected. Channels that are connec=
ted, connecting or disconnecting cannot be removed.
- just:in Linux channels can now be set to use 1080p23.976 and 1080p24 in=
puts.
- Added additional H.264 profiles and a bit-rate settings for just:in Lin=
ux channels.
Just In 3.0.0.A1.711 Release Notes
- This is a 3.0.0 Alpha pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- Improved live:cut logging.
Just In 3.0.0.A1.710 Release Notes
- This is a 3.0.0 Alpha pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- It is no longer a requirement to install the Service USB drivers when u=
sing the just:in user interface. You now only need to install the Service U=
SB drivers if you want to use a Service USB GPI device with live:cut.
Just In 3.0.0.A1.709 Release Notes
- This is a 3.0.0 Alpha pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- Resolved a bug that could result in some ProRes Proxy recordings contai=
ning green frames.
- Added a visual hint to the channel configuration panel when no video mo=
de or audio bit rate is selected.
- Changed to default naming convention to <Name><Channel> ins=
tead of just <Name>.
- When splitting in the user interface, the new previews now receive the =
correct border thickness as specified in the preferences, not the default t=
hickness.
- Recording Quarter HD ProRes Proxy in 10-Bit resulted in green frames. T=
hat has been fixed.
- All XDCAM flavours would create erratic AVF-Files. That has been fixed.=
- The "Switcher" menu item is now correctly shown for input devices that =
support it, allowing for keyboard shortcuts to switch the inputs.
- Added a new "Keyboard" tab in the preferences to define keyboard shortc=
uts if the currently selected input device supports switching in the user i=
nterface, and removed the relevant tab from the "ATEM" input device prefere=
nces.
Just In 3.0.0.A1.708 Release Notes
- This is a 3.0.0 Alpha pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- The default naming convention when setting up a new device is now <N=
ame><Channel> instead of just <Name>.
Just In 3.0.0.A1.707 Release Notes
- This is a 3.0.0 Alpha pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- The "buffer status" overlay is now automatically hidden when the channe=
l view is too small.
- Schedule event are now automatically "clipped" to a maximum of 12 hours=
instead of being silently removed. A warning is then shown in the user int=
erface, and the event's end time is marked in yellow to indicate that the r=
ecording will be shorter than scheduled.
- Renamed "Recording Border Thickness" to "Channel Border Thickness" in t=
he preferences.
- Fixed a bug that allowed Grass Valley HQX to be recorded into incompati=
ble containers.
- If a channel currently displaying its inspector is disconnected, the in=
spector is now automatically closed.
- A new live:cut project can only contain channels that are licensed for =
live:cut.
- Changing a default live:cut path in the preferences no longer requires =
a restart to include it in a new live:cut project.
Just In 3.0.0.A1.706 Release Notes
- This is a 3.0.0 Alpha pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- Writing Uncompressed Data into a QuickTime container is TN2162 complian=
t now. Please not that this only is possible with the AVFoundation flavour =
of QuickTime.
- Attempting to record any DNxHD codec with a 10-bit input now results in=
an error, as only 8-bit inputs can be recorded with DNxHD.
- Licensing for live:cut is now via an engine option (both for macOS and =
Linux engines). You can only include channels in a live:cut project that ar=
e enabled for live:cut. In demo mode, all channels can be tested with a liv=
e:cut project.
Just In 3.0.0.A1.705 Release Notes
- This is a 3.0.0 Alpha pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- Massively improved video preview performance when using various 10-Bit =
video modes on just:in macOS.
- It is no longer possible to create a new live:cut project when no chann=
els are currently selected.
- Added Premiere Pro CC 2018 as a video editor for live:cut projects.
- For live:cut timecode sources "Computer Time" and "Just In", the frame-=
rate is now automatically set to the channel frame-rate.
- The default live:cut timecode source is now "Just In".
Just In 3.0.0.A1.704 Release Notes
- This is a 3.0.0 Alpha pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- There is a new "Reset just:connect" button in the "System" tab in the j=
ust:in Linux configuration panel. This will completely reset just:c=
onnect, removing all channels and presets, so use with extreme care!
- Fixed a bug where stopping and starting just:in macOS channels would oc=
casionally fail, requiring a complete restart of the engine.
- Resolved a bug where clicking the pop-out timecode or channel mode butt=
ons and clicking away (outside of the available options) resulted in the to=
olbar button remaining highlighted.
- When connection to an engine is lost, it is no longer possible to conne=
ct the channel to another "slot" in the user interface. Previously, doing t=
his resulted in the same engine being shown twice in the interface once con=
nection to the engine was re-established.
- Fixed a bug where it was still possible to open the inspector on a chan=
nel that had lost connection to the engine.
- The "Select All" menu item is now disabled when there are no connected =
channels available.
- The "Record" menu item now respects the "Confirm stop recording" prefer=
ence.
- Channel names are now left-aligned in the channel toolbar.
Just In 3.0.0.A1.703 Release Notes
- This is a 2.5.0 Beta pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- When configuring a new device, you now have the option to create an exa=
mple metadata preset.
- When connecting a new channel or starting the user interface with exist=
ing channels, the UI elements are now properly configured with the "mouse e=
xited" status.
- The channel connect panel now shows "Connecting..." and "Disconnecting.=
.." status, during which the relevant button is disabled. This prevents iss=
ues connecting a channel that was currently disconnecting.
- Removed the "Override native frame-rate" option from the engine's prefe=
rences, now there is only a frame-rate option with a default of 10fps.
- When adding a new channel in channel connect panel, the port number is =
automatically "bumped". This means that you can click "Add" several times t=
o add multiple channels with subsequent port numbers.
- Fixed bug where changing the "border thickness" setting in preferences =
was not changing the preview border.
Just In 3.0.0.A1.702 Release Notes
- This is a 3.0.0 Alpha pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- The channel action buttons are now disabled during a transition to or f=
rom recording to prevent a new recording being started before the previous =
finished.
Just In 3.0.0.A1.701 Release Notes
- This is a 3.0.0 Alpha pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- Fixed a bug where the information labels at the top of the preview were=
sometimes not displayed, or displayed too small, after switching the inter=
face to full-screen.
- Alt-clicking the audio monitor buttons now properly enables/disabled au=
dio monitoring on all channels.
- Fixed an issue where selecting another capture preset lead to the audio=
monitor buttons all showing "off" even if audio monitoring was enabled for=
some channels.
- Selecting a capture preset that has fewer audio channels than the previ=
ous one now automatically mutes any audio monitoring for audio channels no =
longer included with the preset.
- Fixed a bug that crashed the interface after deselecting/clearing the c=
apture preset.
- Recording with Photo-JPEG codec would result in visually corrupt files.=
That has been fixed.
- When recording ProRes in Quarter HD files would be green instead of the=
actual footage. That has been fixed.
- Premiere Pro wouldn't recognise anamorphic DV - That has been fixed.
- Naming convention preview example string is being updated to reflect th=
e correct expected counter value.
- The overlays that appear/disappear when moving the mouse inside of a ch=
annel can be fully customised now. To do that, please open the preferences =
and select the "Mouse behaviour" tab. There you can select a combination of=
hide and show, whether you want it to be permanently off or on, or visible=
while the mouse is outside or inside the channel.
- Reset counter for naming conventions now works correctly for just:in Li=
nux channels.
- Counters are correctly incremented between records for just:in Linux ch=
annels.
Just In 3.0.0.A1.700 Release Notes
- This is a 3.0.0 Alpha pre-release.
- This version requires a new 3.0 license code, invalidating any =
older 2.0 or 2.5 license codes. If you already have a valid license code fo=
r an older version, please contact ToolsOnAir for a new code before install=
ing this build.
- There is a new "System" tab in the just:in Linux channel configuration =
panel. Here you can view and save logs from just:connect and just:in Linux =
and restart the services remotely.
- Removed the live:cut application from the DMG as the functionality has =
now been rolled into just:in multi. If you wish to use live:cut you can now=
create a new live:cut project within just:in.
- Resolved a crash starting just:in on systems older than 10.12. This ver=
sion of just:in multi requires at least 10.12 or later.
- Added support for Premiere Pro CC 2017 to live:cut.
- Fixed a bug where text fields in the inspector were not properly deacti=
vated/resigned once active. For example, clicking on a field in the "Clip" =
inspector group and then collapsing (hiding) the group was resulting in the=
edit field being left visible. Now selecting any other control in the insp=
ector, or collapsing/expanding any group will properly deactivate and remov=
e any active text field.
- During batch digitizing all controls are now disabled until finished. T=
hen, only the "Clear table" button is active. Once the table has been clear=
ed, new batch entries may be added to the list again.
- Resolved an issue where clicking on the "Log" button in the batch digit=
izing inspector group will first "commit" any values entered in the in-poin=
t, out-point or duration field before adding a new entry to the batch list.=
Previously, any "active" values in those fields were ignored when adding a=
new entry.
- Fixed a bug where the timecode fields in the batch digitizing inspector=
group incorrectly showed active highlights. Now, only the currently active=
timecode field will display active highlights.
- Made the channel connection panel slightly wider to allow for longer na=
mes and/or IP addresses.
- The "Disconnect" menu item is now only enabled when all of the selected=
channels are connected. If no channels are selected, or any of the selecte=
d channels are not connected, then the "Disconnect" menu item is disabled.<=
/li>
- Renamed "Connect..." to "Connections..." in the "Channel" menu.
- Fixed a crash entering values in a timecode field while moving the mous=
e.
- The channel "timecode" mode button is now "modal" when open. This means=
that it will not collapse when overlapped with the "Buffer Status" field o=
r when the channel preview is small enough that the option buttons reach ou=
tside of the preview.
- Audio monitor is available in the inspector. Click on the channel numbe=
r to listen to a selection of channels, alt-click will enable all channels,=
regardless of the clicked channel.
- Video preview delay has been reduced.
- The "stop on timecode" feature has been changed slightly. Now, once a c=
hannel is recording you can simply enter the timecode in the inspector and =
set "Stop on timecode" to "On". At this point the mode is active, and the r=
ecord button changes to show "TC" in the middle to indicate that the mode i=
s active. You can disable the mode again by setting the option in inspector=
to "Off". Additionally, when closing and opening the inspector for a chann=
el in "stop on timecode" mode, the correct status is shown in the inspector=
.
- It is no longer possible to resize the connect channel window.
- The "View" menu has been removed as the menu items no longer matched th=
e actual options available. It will be added again at a later date.
- If you select a connected channel and then open the connect channel win=
dow and connect to a different channel, the previously connected channel's =
status in the connect window will change from "Disconnect" to "Connect". Pr=
eviously, the disconnect channel still had the incorrect "Disconnect" statu=
s, even though it was already disconnected.
- Fixed a bug where showing the inspector for multiple channels resulted =
in the channel previews having an incorrect aspect ratio. Now the aspect ra=
tio is preserved correctly when "shrinking" the previews to allow for the i=
nspector.
- Removed some unused preferences from the preferences window.
- When a naming convention with a counter field is selected, there is now=
an additional "Reset" button in the inspector that can be used to reset th=
e current counter.
- Resolved an issue where the audio bars sometimes overlaped a channel's =
toolbar.
- Using the keyboard shortcut cmd-k to show the channel connection window=
while the window is already opened no longer results in the window being o=
pened multiple times.
- Fixed a bug where changing the active ethernet device could result in t=
he preview, timecode and audio bars no longer functioning.
------=_Part_10_926120358.1711721298221--